In stock with New Zealand supplier at time of listing. Available from Ammo Direct, either collected or shipped, in 6-10 days. If we are unable to get stock in a timely manner we will contact you and refund in full. Alternatively, please email [email protected] to confirm availability and place your order.

Ruger Precision Gen III 26″ – 6.5 PRC
Heavy-contour (.840″ at the muzzle) barrel features a Ruger Precision® Rifle Hybrid Muzzle Brake to effectively reduce recoil while minimizing noise and blast to the sides of the shooter.
Ruger Marksman Adjustable™ trigger is externally adjustable, with a trigger pull range of 2.25 to 5 pounds; wrench is stored in the bolt shroud.
In-line recoil path manages recoil directly from the rear of the receiver to the buttstock, not through a traditional bedding system, providing maximum accuracy potential.
Ruger Precision® MSR stock with QD sling attachment points features a bottom Picatinny rail and soft rubber buttpad. The left-folding stock hinge is attached to an AR-style buffer tube and accepts any AR-style stock. Length of pull and comb height are adjustable.
Cold hammer-forged, chrome-moly steel barrel with 5R Rifling at minimum bore and groove dimensions, minimum headspace and centralized chamber.
15″ aluminum free-float handguard is black hard-coat anodized aluminum and features Magpul® M-LOK® slots on all four sides for improved scope clearance for long-range scopes and easy mounting of M-LOK-compatible rails and accessories.
Handguard includes integral QD sling attachment points to eliminate the need for additional adaptors, a target-style flat bottom that improves stability and an integral bottom 1.50″ dovetail that is compatible with RRS S.O.A.R. and similar QD systems.
Ambidextrous manual safety for left- or right-handed lever manipulation.
30 MOA Picatinny rail secured with # 8-40 screws for increased long-range elevation capabilities.
“Upper” receiver and one-piece bolt are precision CNC-machined from pre-hardened 4140 chrome-moly steel to minimize distortion.
Three-lug bolt with 70° throw features dual cocking cams and a smooth-running, full diameter bolt body. Bolt body is nitrided for corrosion resistance, smooth operation and durability.
Barrel can be replaced easily by a competent gunsmith using headspace gauges.
Magazine well front is contoured for a positive grip when bracing against shooting supports.
Oversized bolt handle for positive bolt manipulation, with a 5/16″-24 thread pattern for easy replacement. Bolt disassembly tool is stored in the Ruger Precision® Rifle Billet Aluminum Bolt Shroud for easy striker channel cleaning.
“Lower” magazine well halves are precision machined from aerospace-grade 7075-T6 aluminum and are Type III hard-coat anodized for maximum durability.
Extended trigger-reach AR-style grip and 45° ambidextrous safety selector. May be configured with any AR-style grip and selector.
Also includes: two, 8-round AI-Style magazines.

Stock Folding, Adjustable Length of Pull and Comb Height
Finish Type III Black Hard-Coat Anodized
Barrel Length 26″66 cm|26″|66 cm
Barrel Cold Hammer-Forged, 5R Rifling
Thread Pattern 5/8″-24
Twist 1:8″ RH
Grooves 5
Weight 11 lb.4.98 kg|11 lb.|4.98 kg
Capacity 8
Height 7.30″18.5 cm|7.30″|18.5 cm
Overall Length 45.25″114.9 cm-48.75″123.8 cm|45.25″|114.9 cm|48.75″|123.8 cm
Length of Pull 12″30.4 cm – 15.50″39.3 cm|12″|30.4 cm|15.50″|39.3 cm
Folded Length 37.60″95.5 cm|37.60″|95.5 cm
Width 3.30″83 mm|3.30″|83 mm

Product code: RU 18042

Firearms licence required to purchase; this must be presented on pick-up, or for couriered firearms you must complete the Police mail order form.